Specifications

One compact body. Every way to position it.
The production design combines a compact case with rubber corner bumpers that protect the body and act as feet. Position MobileD horizontally, upright or on its side; use the photographic mount for other compatible supports.
MobileD specifications, drawn from the customer manual and the manufacturer’s product brief.
- Dimensions
- 100 × 76 × 46.1 mm · rubber bumpers included
- Weight
- 500 g · bumpers and installed batteries included
- Light source
- 20 W RGBW · OSRAM OSTAR
- Light control
- Colour and dedicated white channel · brightness adjustment
- Wireless network
- Wi-Fi 2.4 GHz
- Applications
- Android · iOS · Windows · macOS
- Group effects
- Matrix · Master/Slave synchronisation · virtual LED-strip behaviour
- Audio-reactive control
- Ambient sound through the light’s microphone; Music through app audio capture
- Network lighting protocols
- Art-Net · sACN / E1.31
- DMX modes
- 4 channels RGBW · 5 channels with dimmer
- PWM configuration (firmware)
- 5 kHz · 8-bit RGBW control · camera compatibility to be verified for the shooting conditions
- Wired connection
- 3-pin XLR DMX OUT · Wi-Fi-to-DMX bridge for a full 512-channel universe
- RGBW effect mapping
- 4 channels per position · DMX start address = Pixel ID × 4 + 1
- Smart home
- Integrated Sinric Pro support · Alexa and Google Home via linked services
- Optics
- Interchangeable lenses · beam options from 10° to 120° · defined or smooth beam
- Mounting
- ¼″ photographic thread · compatible photographic accessories
- Creative accessories
- Lens-ring holders for 3D-printed adapters, light tubes, optical fibres and acrylic displays
- Bumpers & positioning
- Rubber bumpers for protection and support · horizontal, upright or side placement
- Appearance
- Case and bumper colour combinations
- Power
- Rechargeable lithium-ion batteries
- Minimum runtime
- At least 10 hours
- Recharge time
- Under 4 hours
- Charging supply
- 12 V DC · 2 A recommended for one MobileD · not included
- Charging current draw
- Less than 1.5 A per MobileD at 12 V
- Charging connector
- 5.5 × 2.1 mm barrel connector · verify compatible polarity
- Group charging
- 12 V DC supply · allow at least 1.5 A × number of lights · suitably rated splitter cables
- Firmware updates
- OTA over Wi-Fi · one device via its web portal · groups via PC apps for Windows and macOS
- Use
- Indoor · IP20
One light or a whole group. Choose your power supply.
Charge one MobileD with a regulated 12 V DC, 2 A power supply, sold separately. A compatible standard supply lets you choose your own, or use one higher-current supply with suitable splitter cables for several lights instead of a separate adapter for every unit.
Each MobileD draws less than 1.5 A at 12 V while charging. Size a shared supply for at least 1.5 A × the number of MobileD lights charging together.
Recommended supply capacity: 1.5 A × number of MobileD lights
| MobileD lights | Supply output | Recommended current capacity (at least) |
|---|---|---|
| 4 | 12 V DC | 6 A |
| 8 | 12 V DC | 12 A |
| 12 | 12 V DC | 18 A |
For a single MobileD: 12 V DC, 2 A recommended. The power supply is not included.
Keep the output at 12 V DC: increase current capacity, not voltage. Use a compatible 5.5 × 2.1 mm barrel connector and verify the correct polarity before connecting. Charge with MobileD switched off.
Splitter cables and connectors must be rated for the load. The shared cable section carries the total current; each branch must support its own MobileD. Choose conductor size and cable length to avoid overload, overheating and excessive voltage drop. A splitter does not increase the supply’s available current.